Chapter 6: using the setup menu 67 – Sony SAT-A3 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
After selecting the manufacturer, select the CODE type of your
VCR.
VCR RECORDING
4
Select TEST to determine if the POWER ON / OFF, RECORD and
STOP functions of your VCR are working properly.
VCR RECORDING
Manufacturer
Code
BEFORE TESTING
1) Put a tape in your VCR
to be RECORDED OVER
2) Select the correct VCR
line input
3) Turn off your VCR
OK
CANCEL
HELP
CANCEL
5
If the test is succesful, select OK to return to the Setup Menu. If the
test fails, check the connection between the IR Blaster and your
DSS receiver, make sure the correct video input is selected, and/or
try a different code.
Chapter 6: Using the Setup Menu 67