Salter Brecknell WB-521 Series - Manual (Page 45)

SBI521 Service Manual 43
*The setting will be limited by the choice of REGULA
FILTER FLT1.TH 0-255 40 Digital filter1 threshold: 0=no filter1
1-254=filter1 used only when
vibration in ±0.5d*(1-254)
255= filter1 be always used
FLT1.ST 1-64 8 Digital filter1 intensity 1-64 ADC’s data will be averaged
FLT2.TH 0-255 8 Digital filter2 threshold 0=no filter2
1-254=filter2 used only when
vibration in ±0.25d*(1-254)
255= filter2 be always used
FLT2.ST 0-255 240 Digital filter2 intensity 0-255=weak to strong
FUNC HOLD YES YES Enable or disable hold
function YES
NO
NO
COUNT YES NO Enable or disable
counting function YES
NO
NO
PERCNT NO NO Enable or disable percent
weighing function (1)NO=disable
(2)100%=enable and display format
is 100%
(3)100.0%=enable and display
format is 100.0%
(4)100.00%=enable and display
format is 100.00%
100%
100.0%
100.00%
COMPAR YES YES Enable or disable data
comparison function YES
NO
NO
ACCUMU NO NO Accumulation Mode
selection (1)NO=no accumulation function
(2)MANUAL=add up current number
to accumulation memory after
[TOTAL] key is pressed
(3)AUTO=automatically add up
current number to accumulation
memory after scale is stable and
weight is over (NLD.RNG)
MANUAL
AUTO
WT.ADJ YES NO Enable or disable weight
fine-tuning using keypad
in weighing mode YES
NO
*If (REGULA) ≠none, this item is
NO
CONFIG
SubMenu1 SubMenu2 Option Default Parameter Description Comment