Dynojet 250i: Pit Installation Guide - Manual (Page 49)

I N S T A L L A T I O N
Cable Track Installation
Version 4 In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide
2-27
2 Secure the cable track to the cable hole cover track mount on the junction box
using two 4-40 x 3/8-inch screws and two 4-40 nuts.
3 Secure the cable track mounting bracket to the cable track using two
4-40 x 3/8-inch screws and two 4-40 nuts.
Figure 2-22: Install the Cable Track and Mounting Bracket
PD163