Kontron CG1200 Carrier Grade Server - Manual (Page 21)

15
Kontron CG1200 Carrier Grade Server Installation and Maintenance Guide 15
•
Up to two 70W server board processors
•
Up to 256 GBytes of DDR3 memory
•
Up to four hard disk drives
•
One PCIe adapter
The cooling subsystem meets acoustic and thermal requirements at the lower fan speed settings. At the
higher fan speed settings, thermal requirements are met for the maximum ambient temperatures, but
acoustic requirements are not specified above 23 C+/-2 C.
2.17 Processors and Memory DIMMs
NOTE: To avoid integration difficulties and possible board damage, your server must meet the
requirements outlined below. For a list of qualified processors refer to the CG1200 Carrier Grade Server
Configuration Guide located on the support website at
http://us.kontron.com/support/ (search for CG1200,
click on Product Downloads, then Ordering Guide). For a list of qualified DIMMs refer to the Tested
Memory List at
http://us.kontron.com/support/ (search for CG1200, click on Product Downloads, then
Compatibility Matrix).
2.17.1 Processors
The S2400EP4server board accommodates FC-LGA 1356 Socket B2 support for two Intel® Xeon® E5-
24XXL or E5-24XXL v2 processors. These processors can be ordered from Intel or an authorized
distributor using the Kontron part numbers listed in the CG1200 Carrier Grade Server Configuration
Guide.
2.17.2 Memory
The S2400EP4 server board supports 8 DIMM slots – one DIMM slots/channel for channels A,B,D,E and
two DIMM slots/channel for channels C and F. The server board supports registered DDR3 Memory
(RDIMM), Low-Voltage DDR3 memory (LVDDR3), load-reduced DIMMs (LRDIMMs), or unbuffered DDR3
memory (UDIMM) with data transfer rates of 800, 1066, 1333, and 1600 MT/s).
For detailed information about configuring memory on the server board, see the Intel® Server Board
S2400EP4 Family TPS.