Kontron CG1200 Carrier Grade Server - Manual (Page 45)

39
Kontron CG1200 Carrier Grade Server Installation and Maintenance Guide 39
Figure 26: Removing a Hard Drive
4. Install the new drive in the drive carrier (Figure 27, “A”) and secure the drive with the four screws that
come with the carrier (“B”).
Figure 27: Installing a Hard Drive
5. With the drive carrier locking lever fully open, push the hard drive carrier into the drive slot in the
chassis until it stops (Figure 28 “A”).
6. Press the locking lever until it snaps shut and secures the drive in the slot (“B”).
Replace the front bezel. For instructions, see 3.2.4, “