Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 14)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 8
2.4 Specifictions of Cutter
Symbol Descriptions Meaurement
A Tab size on Partial Cutting 1.5±0.5mm
B Position of Printer Head (Cut to Print) 9.5±1mm
C Limit of Backfeed 6.5mm
D From edge of pape (1 dot~) to the
center of tab on partial cutting 30±0.5mm(NP-2511)
40±0.5mm(NP-3511)
※ Value of D doesn’t change in case paper wide changes to 75 or 65mm
1) Cutting Method ： Slide System
2) Cutting Mode ： Full cut／Partial Cut Ａ／Partial Cut Ｂ
※ Selectable by Command
3) Allowance of Cutting Frequency ： 30 cuts per minutes
4) Paper Thickness ： 65～150µｍ
※ In case Partial Cut B is conducted with the paper with 75µm and
more thicker, there may be a case that paper is drawn from
mechanism side at the time of extracting paper.
5) Note:
・ In case you burden palaten like drawing paper strongly after partial cut etc, please pay
attention there is a case that the next line is not properly printed. You should pull left or
right end of paper to avoid burdening palaten or taking measure of feeding the paper by
approx. 1mm before printing.
・ 2mm paper feed is automatically effected to avoid paper jam after cutting, the above
mentioned cutting margin is 11.5±1mm.
Feed Direction
C
Cutting Postion
Position of Printing Head
A
Print Area
B
Backfeed Limit
D