Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 41)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 35
12) 【Underline Set/Reset】《ESC - n》
Code：〔1B〕h＋〔2D〕h＋n ※〔 00≤n≤02〕h
Sets and Resets Underline
* Underline is valid for all characters except for the area skipped by horizontal tab. Also
Underline is not valid for 90 ° rotated character.
* This command is not valid when Kanji mode.
* Underline is verified with n value as shown bellow.
n(hex) Type of underlines
00 Reset underline
01 Set one dot underline
02 Set two dot underline
* Default value of ｎ is 〔00〕h.
13) 【1/6 inch line feed pitch】《ESC 2》
Code：〔1B〕h＋〔32〕h
Sets one line feed to 1/6th of an inch.
14) 【Sets smallest pitch line feed】《ESC 3 n》
Code：〔1B〕h＋〔33〕h＋n ※〔 00≤n≤FF〕h
Sets a line feed pitch to n/203rd of an inch.
* Despite of height set by value, the same space with character height is sent by line
feed.
* Default value of n is 〔22〕h.
15) 【Data input control】《ESC = n》
Code：〔1B〕h＋〔3D〕h＋n ※〔 00≤n≤FF〕h
Select apparatus to be data input from host
* Each bit of N indicates below;
value
bit function
0 1
0 Printer invalid valid
1 Undefined
2 Undefined
3 Undefined
4 Undefined
5 Undefined
6 Undefined
7 Undefined
* When printer is not selected、all receiption data is disregarded until this printer is
selected by this command.
* When printer is not selected, busy situation may remains by operation of printer.
* Default value of n is〔01〕h.
16) 【Printer initialization】《ESC @》
Code：〔1B〕h＋〔40〕h
Clears the data stored in the print buffer and resets each setting to default values.
* It does not clear the data stored in the internal receive buffer.
* re-reads the dip switch and memory switch.
* It is stored in the internal receive buffer and activated in sequential.