Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 30)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 24
4.7 How to set roll paper
1)
NP-3511
- As illustrated, you lift the shaft vertically and set a roll paper passing through the shaft
(Pay attention to the direction of roll paper.)
- Set shaft back to previous position.
- Put the edge of paper into loading slot. (Put it straight into slot, not curl)
- Retract the paper automatically with sensor detected. (In case of power on)
- Paper is retracted into a certain length and can print after cut the excess of it.
(Attention): The leading edge of paper should be straight and at right angle.
Paper at cutout state might be retracted at an angle.
Paper Support Shaft
Roll paper
Winding direc.
Guide for paper
Print side