Caution warning warning, Warnings and precautions – PDR Mounts IWB125 User Manual

Page 2

Advertising
background image

Avoid installing in locations where the temperature and humidity are excessively high, and where contact with any

not install in locations where there are excessive amounts of dust,

Do not block the ventilation holes. Leave sufficient clearance in regard to the surroundings to avoid blocking the ventilation.

.

The internal temperature could elevate and possibly result in fire. Install the in wall box IWB-125 (4") or more away from surroundings.
Do not install in locations where there is excessive vibration or impact. Injury and damage could result from the panel display

Use the specified bolts and screws in the specified places and tighten firmly. Failure to do this could cause injury if the display falls.

could result with injury due to the display falling.

Always use at least two people to perform the installation work. Injury could result from dropping heavy objects.

display to fall and cause injury.

WARNINGS AND PRECAUTIONS







INSTALLATION ON 2 X 4 WOOD STUD WALLS ONLY




water is possible. These can result in fire or electric shock.

Do not install close to an air conditioner intake or outlet. Do
oily smoke or tobacco smoke. Fire could result.

falling.




Do not alter any of the parts. Do not use broken parts. This





Note: Incorrect installation can cause the

2

CAUTION

WARNING

WARNING

Rev 011108

The wall structure must be capable of supporting at least 4 times the weight of the display and the IWB-125 kit. Check with a qualified
installer to verify the walls integrity to support the display and the in wall kit per instructions. Failure to do so could cause serious injury.

Caution: installation of the unit is to be carried out by qualified technicians only. Install in an appropriate location by
checking the wall structure and durability for safety and accident prevention

Always install so that the load is carried by the wall support structure (not the dry wall ) . The wall structure must be able to support at least 4 times the weight of the display
and the IWB-125 kit.

Display + IWB-125

MAXIMUM WEIGHT - 125 Lbs. ( 57 Kg.)






Total load of the

Advertising