Satellite Taurus - Manual

PN# 18680 REV. G 1 5-17-11
INSTRUCTIONS
Taurus (BM) Unit Assembly
Tool Selection
QTY Description QTY Description
1 Flat head screw driver 1 Air ratchet
1 Drill with ¼” Bit 1 7/16” deep well socket (for wood base)
1 Drill with 3/16” Bit 1 9/16” deep well socket (for roto-molded base)
1 Rivet Gun 1 Stopper for 3/16” drill bit.
1 Phillips #3 Screw Driver
Read all instructions carefully before starting assembly. All orientation descriptions are
facing the front of competed unit. Call your Synergy World sales representative if you have
any questions. 800-352-1986 USA only and Direct #763-519-6526
Ensure all unit components and fasteners are present before starting to assemble unit.
Additional
Notes:
1) In order to assure proper alignment and structural integrity, the Front,
Walls w/corner posts, and Base must be assembled in said sequence.
Roof can be joined prior to Base/Wall joint.
2) This manual can be used to identify item numbers for ordering
replenishment.
2530 Xenium Lane North, Minneapolis, MN 55441
Telephone: 763-553-1900 / Fax: 763-553-1905
800-328-3332/ www.satelliteindustries.com