Initializing a cd-rw disc, 2> press t>/na to start erasing – Yamaha CDR-HD1500 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ERASING DATA ON A CD-RW DISC
■ Initializing a CD-RW disc
This operation initializes a CD-RW disc.
1
m
Set a CD-RW disc in the disc tray, then press and
hold ERASE for about two seconds.
"Erase Disc ?” appears on the display.
To cancel erasing, press □.
2>
Press t>/na to start erasing.
"Erasing” flashes on the display, and the level meter shows the
erasing progress (the process takes about 20 minutes).
"Erase Last" and "Erase TOC" cannot be applied to a CD-RW
disc recorded with “Eull Auto" (R42) (except for adding track
data to a disc without finalization) or a C'D-RW disc recorded
with dupliciition.
Never turn off the pow'er of this unit during erasing.
If "Check Disc” appears on the display during erasing, and
erasing slops, there may be dust or damage on the CD-RW disc.
Check the CD-RW disc and start the erasing operation again.
O
0
1
I
D
O
O
TJ
<
z
o
49