Cub Cadet Z-Force S Series - Manual (Page 161)

Maintanence Intervals
155
Lubrication
To help keep the Z-Force-S in proper running order, Cub Cadet recommends the following lubrication intervals be
used (adjustable to local conditions). Lubricate with 737-0168 grease or an equivalent NGLI grade 2 lithium based,
lead-free multi-purpose non-soap grease.
NOTE: Lubricate all of the pivot points with a light coating of oil once a season.
NOTE: There are 2 grease fittings on eash spindle. Only one needs to be used.
Engine maintenance
The recommended maintenance intervals listed in this manual are a guideline. They are adjustable for local con-
ditions.
* First oil change at 8 hours.
Lube Point
Number of
fittings
Interval
Wheel yokes 2 25 hours
Steering gears 2 25 hours
Front wheel bearings 2 25 hours
Lube pedal pivot points - 10 hours
Spindles 3 25 hours
Maintenance items Interval
Oil Change* 100 hrs
Oil filter 200 hours
Clean the air filter 100 hrs
Replace the air filter 200 hrs
Spark plugs 100 hrs
Fuel filter 100 hrs
Clean the engine 100 hours
CHAPTER 9: MAINTENANCE INTERVALS