Cub Cadet Z-Force S Series - Manual (Page 89)

Steering
83
5. Slide the steering shaft and bushing into the bottom
of the steering column.
6. Align the bushing with the hole in the steering col-
umn.
7. Tap the bushing in place using the E-ring on the
steering shaft. See Figure 6.106.
8. Install the upper bushing into the top side of the
steering column. See Figure 6.107.
9. Install the steering column dampener pivot bolts
using a 9/16” wrench and a 3/4” wrench.
See Figure 6.108.
NOTE: Make sure the shoulder of the lift pivot bolt passes
through the lift activation lever.
Figure 6.106
Bushing
E-ring
Figure 6.107
Upper bushing
Figure 6.108
Pivot bolts
Lift activation lever