KEYENCE IV-M30 - Manual (Page 2)

2
IV Series (Monitor) - IM_E
Precautions on installation
y To use the IV-M30 correctly and safely, avoid
installing it in the following locations. Failure
to do so may cause fire, electric shock, or
malfunction.
y Outdoors
y Altitude above 2000 m
y Locations that are humid, dusty or poorly
ventilated
y Locations where the temperature is high
such as those exposed to direct sunlight
y Locations where there are flammable or
corrosive gases
y Locations where the unit may be directly
subjected to vibration or impact
y Locations where water, oil, or chemicals
may splash onto the unit
y To improve the anti-noise feature, install
the unit following the precautions below.
Otherwise, a malfunction may occur.
y Do not mount the unit in a cabinet where
high-voltage equipment is already installed.
y Mount the unit as far from power lines as
possible.
y Separate the unit as far as possible from the
devices that emit strong electric or magnetic
field (such as solenoid or chopper).
y Separate the I/O signal line from the power
line or high-voltage line.
y For power supply
y Noise superimposed on the power supply
could cause malfunction. Use a stabilized
DC power supply configured with an
isolation transformer.
y When using a commercially available
switching regulator, be sure to ground the
frame ground terminal.
y Devices including this unit are precision
components. Do not apply shock or vibration.
y When connecting to a network, let engineers
who are knowledgeable about networks
handle it.
Precautions on Regulations and Standards
UL Certification
This product is a UL/C-UL Listed product.
y UL File No. E207185
y Category NRAQ, NRAQ7
Be sure to consider the following specifications when using
this product as a UL Listed product
y Use a power supply with Class 2 output defined in
NFPA70 (NEC: National Electrical Code).
y This product is for use on a flat surface of a Type 1 enclosure.
CE Marking
Keyence Corporation has confirmed that this product complies with
the essential requirements of the applicable EC Directive, based
on the following specifications. Be sure to consider the following
specifications when using this product in the Member State of
European Union.
z z EMC Directive (2004/108/EC)
y Applicable Standard EMI : EN61326-1, Class A
EMS : EN61326-1
y The length of Monitor power cable, Ethernet cable and
Monitor cable must be less than or equal to 30m.
Remarks:
These specifications do not give any guarantee that the
end-product with this product incorporated complies
with the essential requirements of EMC Directive. The
manufacturer of the end-product is solely responsible
for the compliance on the end-product itself according to
EMC Directive.
Checking the Package Contents
Intelligent Monitor
y IV-M30
Monitor x 1
Stylus x 1
String for hanging the stylus x 1
Wall mounting adapter x 1
Screw for adapter x 2
Hexagon nut x 2
Instruction Manual x 1
(This manual)
Starting Guide x 1
Options for Monitor
z „ Monitor power cable (M8 4pin - strand wire)
y OP-87443 (2m) y OP-87444 (5m) y OP-87445 (10m)
Monitor power cable (M8 4pin - strand wire) x 1
z „ USB memory (1GB)
y OP-87502
USB memory x 1
z „ Protection sheet
y OP-87463
Protection sheet x 1
z „ Stylus
y OP-87462
Stylus x 1
String for hanging the stylus x 1
Same as accessories for monitors.
Optional parts in case of loss/damage.