KEYENCE IV-M30 - Manual (Page 3)

3
IV Series (Monitor) - IM_E
z „ Wall mounting adapter
y OP-87464
Wall mounting adapter x 1
Screws for adapter x2
Hexagon nut x 2
Same as accessories for monitors.
Optional parts in case of loss/damage.
z „ Panel mounting adapter
y OP-87465
Panel mounting adapter x 1
Mounting screw
(lateral) x 2
Mounting screw
(front) x 4
“Mounting to a panel” (Page 5)
z „ DIN mounting adapter
y OP-87466
DIN mounting adapter x 1
Mounting screw
(lateral) x 2
“Mounting to the DIN rail” (Page 5)
Communication Cable
z „ Monitor cable (M12 4pin - M12 4pin)
y OP-87450 (2m)
y OP-87451 (5m)
y OP-87452 (10m)
y OP-87453 (20m)
Monitor cable (M12 4pin - M12 4pin) x 1
z „ Ethernet cable (M12 4pin - RJ-45)
y OP-87457 (2m) y OP-87458 (5m) y OP-87459 (10m)
Ethernet cable (M12 4pin - RJ-45) x 1
Name and function of each part
4
5
6
3
7
2 1
8
9
10
1 Power connector
Connects the monitor power cable.
“Cables” (Page 6)
2 Connector for the monitor cable/Ethernet cable
Connector for connecting the monitor cable or Ethernet
cable. Used when connecting with the sensor or Ethernet
switch.
“Cables” (Page 6)
3 Unlock button
Push this button when dismounting the monitor from the
wall mounting adapter or DIN mounting adapter.
“Unmounting from the wall mounting adapter” (Page 5)
“Unmounting from the DIN mounting adapter” (Page 6)
4 Indicator light (PWR)
Indicates the operating status of the monitor.
y Green (ON) ...... The power is turned ON.
y Red (ON) .......... Unrecoverable error occurred to the
sensor or monitor.
y Red (Blink) ....... Recoverable error occurred to the
sensor or monitor.
y (OFF) ............... The power is turned OFF.