Kofax Document Exchange Server 2.5 - Manual (Page 8)

Kofax Front-Office Server Administrator’s Guide for Lexmark MFPs
8 Kofax, Inc.
Use the following procedures whenever you need to install an upgraded version of the Kofax
Front-Office Server application.
Preparing for the Installation
Before installing the Kofax Front-Office Server application on the MFP, do the following:
„
Install Kofax Front-Office Server.
„
Connect the MFP to a network that is available to Kofax Front-Office Server.
„
Use Kofax Front-Office Server Administration Console to do the following:
„
Create an administrator user.
„
Install a license that grants you the use of one or more input devices such as MFPs.
See the Kofax Front-Office Server Administration Console Help for instructions.
„
Make sure port 8888 is open for communication between Kofax Front-Office Server and the
MFP. (If you want to use another the port, see Changing the IP Address or Other
Configuration Settings for more information.)
Installing the Kofax Front-Office Server Application
Use the Lexmark Web page to install the Kofax Front-Office Server application. The installation
process consists of the following phases:
„
Installing the application on the MFP
„
Configuring the MFP to connect to Kofax Front-Office Server
„
Making sure the application on the MFP has started
X To install the Kofax Front-Office Server application on the MFP
1 Go to the Lexmark Web page by doing either of the following:
„
In your browser window, enter the URL for the MFP.
„
If you have already discovered or added the MFP to Kofax Front-Office Server: In
Kofax Front-Office Server Administration Console, on the General tab for the device,
select Connect in the Available Actions box. Then, click Apply.
2 On the Device Status page, click Configuration (on the left side of the page).