ALTANA BYK-mac i COLOR Manual - Manual (Page 43)

42
Setup
11.1.2.3 Illuminant/Observer
You can choose among the illuminants/observers
shown on the left side.
11.1.3 Effect (only available with BYK-mac i)
This function lets you choose the effect parameters
to be displayed.
You can choose individual effect parameters or ”All”.
11.1.4 Fluorescence Limit
This function allows setting a limit for the instrument
to give an audio/video signal when fluorescent light
is detected. If the function is activated, a checkmark
appears.
You can define the maximum difference between
fluorescent compensated and fluorescent non-
compensated readings as percentage of the used
color tolerance.