Futaba 3PJS - Manual (Page 20)

20
Before Using
RF Module
Removal
RF module
Tabs
1. Pull the RF module forward while
pressing the tabs at the left and
right inward.
Insertion
1. Insert the RF module while being
careful not to bend the transmitter
side connector pins.
2. Insert the RF module until the tabs
at the left and right snap in place
with a “click”.
RF Module Temperature Rise
The temperature of the RF module will rise slightly during operation.
Handling the Data Pack
The set data for 8 units can be stored in the 3PJ SUPER transmitter body and the set
data for 8 more units can be stored in a DP-16K (Option) removable data pack.
Data pack DP-16K
(Option)
Data pack insertion slot
-Grasp the dustproof cap and insert
the data pack fully.
Inserting and removing the data pack
Always turn off the transmitter power before removing and inserting the data pack.
Data pack initialization
When the data pack is used and the power is turned on for the first time, the data pack
must be initialized before it can be used with this transmitter. When "CAM-INI?" is
displayed on the screen after the power is turned on, press the "+" key. This automati-
cally initializes the data pack. This operation is unnecessary thereafter.
CHG
DSC