Futaba 10C 2.4GHz User Manual

Page 32

Advertising

MODEL NAME

: assigns a name to the current model memory. By giving each model a name that is immediately recognizable,

\RXFDQTXLFNO\VHOHFWWKHFRUUHFWPRGHODQGPLQLPL]HWKHFKDQFHRIÀ\LQJWKHZURQJPRGHOPHPRU\ZKLFKFRXOGOHDGWR
a crash.

Adjustability and values:
• Up to 10 characters long.
• Each character may be a letter, number, blank, or a symbol.
• The default names assigned by the factory are in MODEL-xxxx format

(MODEL-0001

IRU¿UVWPRGHOPHPRU\HWF

NOTE: When you COPY one model memory over another, everything is copied, including the model's name. Similarly, if
you change MODEL TYPE or do a MODEL RESET, the entire memory is reset, including MODEL NAME

6RWKH¿UVWWKLQJ\RXZLOO

want to do after you COPY a model, change its type, or start from scratch, is rename the new copy to avoid confusion.
If using multiple frequency modules to be able to transmit on multiple channels, we recommend using the last 2 characters
to indicate the receiver's channel for clarity. For more information on frequency transmission, see p. 8.

GOAL of EXAMPLE:

STEPS:

INPUTS:

Name model 3 “Cap-232_” (where the
underline represents a blank space.)

Open MODEL submenu.

for 1 second.

(If ADVANCE,

again.)

to MODEL.

Confirm you are currently using the
proper model memory. (Ex: 3)

If SELECT does not indicate 3,

perform MODEL SELECT, p. 25.

G o t o N A M E a n d c h a n g e t h e f i r s t
character. (Ex: M to C)

to M

to C.

Choose the next character to change.

Repeat the prior steps to complete
naming the model.

to a

(note: lower case is available)

Repeat.

Close.

Where next?

Change the MODEL TYPE to glider or helicopter: see p. 34.
Change modulation [FM (PPM

PCM or 2.4G-10CH7CH]: see p. 35.

Utilize servo REVERSE: see p. 38.
Adjust servo travel with END POINT: see p. 39.
6HWXSGXDOWULSOHUDWHVDQGH[SRQHQWLDOD/R,EXP): see p. 42.

Advertising