Interlogix Concord 4 User Manual - Manual (Page 16)

14 Concord 4 User Manual
Chime feature
Turning on the chime feature is like having a doorbell on every protected door
and window. When this feature is on, interior sirens and speakers sound two
beeps whenever anyone opens a protected door or window.
The chime feature works only in Level 1 (off).
To turn the chime feature on or off:
1. While in Level 1, from any touchpad, press 7, 1.
2. While the chime feature is on, touchpads display CHIME IS ON or CHIME
ON .
Chime-on-close
The chime-on-close feature works like the regular chime feature, but in addition
to the double beeps heard upon opening a protected door or window, the system
sounds one long beep when the door or window is closed again. You can turn
the chime-on-close feature on or off from the programming menus. See
“Programming” on page 55 for information on programming your system.
Voice chime
Your system may have the ability to speak the sensor name whenever someone
opens a protected door or window. When this feature is on, speakers announce,
“Sensor name open/closed”. You can turn the voice chime feature on or off from
the programming menus. Check with your dealer and see “Programming” on
page 55 for information.
No delay for instant alarm
You can choose to turn off the entry and exit delays, causing the delay doors to
arm immediately. Anyone entering through a delay door when the system is set
to no delay would immediately cause an alarm.
The no delay feature is normally used:
• When staying home after arming the system.
• When arming or disarming your system from outside (requires a wireless
touchpad).
Note: If the quick arm feature is on, an access code is not required. See “Quick
arm” on page 13.
To arm to Level 2 or Level 3 with no delay using a touchpad:
1. Close all perimeter doors and windows.
2. Press 2, code to arm to Level 2, or press 3, code to arm to Level 3.