Checking system status – Interlogix Concord 4 User Manual User Manual
Page 21
Concord 4 User Manual
19
Your installer may have configured your system so that you can control some
outputs from your touchpad. Have the installer list and explain any outputs that
are programmed for your control.
To turn the output on or off, from any touchpad, press 7, 7, output number. If the
output was already activated, it will shut off. If the output was off, it will activate.
Checking system status
Checking the system status means finding out the current condition of your
system. This includes finding out if any sensors are open or currently bypassed,
whether or not the AC power and backup battery are okay, the nature of the most
recent alarm, and more, depending on the features in use and the equipment in
your system.
Check the system status if:
• Your system sounds trouble beeps (five short beeps every minute).
• Your touchpads display, ALARM, and POLICE, AUXILIARY, or FIRE.
• Your touchpads display, PRESS STATUS.
If an alarm or system trouble condition has occurred, it is displayed on a
touchpad the first time you do a short or full status check. Doing a system status
check a second time displays the system status including any trouble conditions.
If any alarm or system trouble is active, it continues to show up in every status
check until the system is disarmed.
Short system status
A short system status indicates the current arming level, sensor status (whether
open or bypassed), low battery, supervisory, auxiliary phone, AC power or
backup battery failures.
To get a short system status, press * (Status).
The system sounds beeps according to the current arming level (one for Level 1,
two for Level 2, three for Level 3). Touchpads display and optional voice modules
announce the status information. For example, SYSTEM IS OK or SENSOR 02
OPEN
.
Full system status
A full status combines the short status information with added details about
specific system features.
To get a full system status, press *, *.
Interior sirens sound beeps according to the current arming level. Touchpads
display and option voice modules announce the status information, for example,