Interlogix Concord 4 User Manual - Manual (Page 61)

Concord 4 User Manual 59
Remote phone access. Dial the phone number and then press #, code, #, 9
code.
Touchpad. Press 9, code.
2. Enter a programming command sequence (see Table 12 below.)
Table 12: Programming shortcuts command sequences
Command Programming sequence
Time *, 020, TTTT, #
Date *, 021, DDMMYY, #
Regular user codes Concord 4 (continues up to User 229):
User 00: *, 03000000, nnnn, #
User 01: *. 03000010. nnnn. #
User 02: *, 03000020, nnnn, #
Concord Express V4 (continues up to User 15)
User 00: *, 0300000, nnnn, #
User 01: *, 0300001, nnnn, #
User 02: *, 0300002, nnnn, #
If using alphanumeric or fixed display touchpads, use A or B to
scroll through the code attributes and change them as required.
Partition master code Keypad must be in the partition to access the partition master code.
Partition 1: *, 0310, nnnn, #
Partition 2: *, 0311, nnnn, #
Partition 3: *, 0312, nnnn, #
Partition 4: *, 0313, nnnn, #
Partition 5: *, 0314, nnnn, #
System master code *, 0320, nnnn, #
Direct bypassing attribute *, 030 nnn (user number) 1, 1 (off) or 2 (on), #
Remote access attribute *, 030, nnn (user number) 2, 1 (off) or 2 (on), #
*, 030, nn (user number) 2, 1 (off) or 2 (on), # (Concord Express
V4)
System test attribute *, 030, nnn (user number) 3, 1 (off) or 2 (on), #
*, 030, nn (user number) 3, 1 (off) or 2 (on), # (Concord Express
V4)
Latchkey report attribute *, 030, nnn (user number) 4, 1 (off) or 2 (on), #
*, 030, nn (user number) 4, 1 (off) or 2 (on), # (Concord Express
V4)
Partition assign attribute
(Concord 4 systems only) *, 030, nnn (user number) 5, 1 to 6, #
Downloading *, 041, 1 (off) or 2 (on), #
Touchpad brightness *, 043, 0 to 3, #
Volume *, 044, 0 to 7, #
Note: Only available with PIVM or VOM installed.