Longshine LCS-8056C2 - Manual (Page 33)

Commands for Host-Processed Modems Reference Manual
100498E Conexant 3-11
+GCI - Country of Installation
This extended syntax command indicates and selects the country of installation for the
modem. This parameter selects the settings for any operational parameters that need to be
adjusted for national regulations or telephone networks.
Syntax
+GCI=<country_code>
Defined Values
<country_code> 8-bit country code from Annex A of T.35. The value is the
hexadecimal equivalent of the T.35 code, with bit 8 treated as the
most significant bit and bit 1 treated as the least significant bit.
Default
If the modem is specified for use in only one country, that country code is the default.
Otherwise, the default is the expected country of sale or first installation. The modem may use
hardware means to select the country of installation, in which case the modem uses that to
determine the default value.
Reporting Current or Selected Values
Command: +GCI?
Response: +GCI: <current country_code>
Example: +GCI: 3D Indicates that the modem is set for France.
Reporting Supported Range of Parameter Values
Command: +GCI=?
Response: +GCI: (<country_code>[,<country_code>[,<country_code].......]]
Example: +GCI: (20,73,B5) The modem can be set for Canada, Mexico
or the United States.