Etbm - call termination buffer management, Syntax, Defined values – Longshine LCS-8056C2 User Manual
Page 66: Reporting current or selected values, Reporting supported range of parameter values
Commands for Host-Processed Modems Reference Manual
3-44
Conexant
100498E
+ETBM - Call Termination Buffer Management
This extended-format compound parameter controls the handling of data remaining in modem
buffers upon call termination. It accepts three numeric subparameters:
Syntax
+ETBM=[<pending_TD>[,<pending_RD>[,<timer>]]]
Defined Values
<pending_TD>
Decimal number 0 specifying that disconnect will occur
immediately and all buffered transmit data will be discarded when
the local DTE requests call disconnection.
<pending_RD>
Decimal number 0 specifying that disconnect will occur
immediately and all buffered receive data will be discarded when
the local DTE requests call disconnection.
<timer>
Decimal number 0 specifying that the modem will not attempt to
deliver the buffered data before abandoning the attempt and
discarding remaining data.
Reporting Current or Selected Values
Command: +ETBM?
Response: +ETBM:
<pending_TD>,<pending_RD>,<timer>
Example: +ETBM:
0,0,0
Reporting Supported Range of Parameter Values
Command: +ETBM=?
Response: +ETBM:
(<pending_TD>
range),(<pending_RD> range), (<timer> range)
Example: +ETBM:
(0),(0),(0)