Longshine LCS-8056C2 - Manual (Page 42)

Commands for Host-Processed Modems Reference Manual
3-20 Conexant 100498E
&K - Flow Control
This command defines the DTE/DCE (terminal/modem) flow control mechanism.
Syntax
&K[<value>]
Defined Values
<value> Decimal number corresponding to the selected option.
0 Disables flow control.
3 Enables RTS/CTS flow control. (Default for data
modem modes.)
4 Enables XON/XOFF flow control.
5 Included for compatibility only and has no effect
other than returning an OK result code.
6 Included for compatibility only and has no effect
other than returning an OK result code.
Result Codes
OK <value> = 0, 3, 4, 5, or 6.
ERROR Otherwise.
&M - Asynchronous/Synchronous Mode Selection
This command is included for compatibility only and has no effect other than returning a
result code. The only valid values are 0-3.
Syntax
&M[<mode>]
Defined Values
<mode > Decimal number corresponding to the selected value: 0-3.
Result Codes
OK <mode> = 0 to 3.
ERROR Otherwise.