PRG Controlling VARI-LITE Equipment Using DMX 512 - Manual (Page 56)

DMX512 R EFERENCE G UIDE
4 8 02.3004.0300.54
Modular Rack to Mini-ACS Rack Input Cable
This input cable is used to supply power to a mini-
ACS rack when used with the modular rack. This
cable uses a Hubbell receptacle on one end and an
Epic plug on the other. It is connected from the AUX
1 or AUX 2 Epic receptacle at the modular rack to
the Hubbell plug at the mini-ACS rack.
Series 200 Trunk Cable
Series 200 trunk cables distribute power and
data to Repeater Boxes for Series 200
luminaires. This cable uses a 41-position
Pyle-National or Matrix Science connector.
The cables are color-coded at each end to
denote length: blue (100 feet), green (60
feet), white (30 feet).
Maximum recommended length is 500 feet.
APS Trunk Cable
APS trunk cables (also called APS6 cables or APS6
trunk runs) distribute lamp power from SixPack
chassis or conventional lighting dimmers to Smart
Repeater units for Series 300 luminaires. This cable
uses a 19-position Veam-Socapex compatible
connector. The cables are color-coded at each end
to denote length: blue (100 feet), green (60 feet),
white (30 feet). This cable is similar to a standard
Socapex cable except it contains special shielding for operation of VL5Arc/VL6/VL7 luminaires.
When only operating VL5/VL5B luminaires on a Smart Repeater unit, industry standard 19-pin
Socapex cables can be substituted for APS trunk cables.
Maximum recommended length is 1000 feet.