PRG Controlling VARI-LITE Equipment Using DMX 512 - Manual (Page 77)

S YSTEM : H ANGING
0 2. 3 0 0 4. 0 3 00 . 5 4 69
3
Series 300 Hanging Hardware: VL7
The VL7 luminaire requires a different type of truss attachment hardware than the other Series 300
luminaires. For the VL7 luminaire, two types of clamps are available: a round pipe clamp for 2" pipe
applications and an adjustable clamp for square pipe or other applications. A single truss clamp,
attached to the pan tube, is used for a standard horizontal hang. A vertical hang can be achieved using
an appropriate vertical hang assembly in combination with a truss clamp.
Figure 3-6: VL7 Clamps
When installing a VL7 luminaire with the round pipe clamp, swing latch up and back as far as
possible. If the latch is not in the proper position, the clamp will not fit on the pipe.
Figure 3-7: VL7 Round Pipe Clamp Orientation
VL7 Round
Pipe Clamp VL7 Square
Pipe Clamp
HKINSTAL
Latch Wing Knob
Correct Incorrect
Clamp Bolt
Clamp will bind
on pipe. Truss Pipe