SIG SAUER STL-300J Stoplite User Manual
SIG SAUER Hardware
STL-300 STOPLITE
®
TacTIcaL LIghT & LaSEr
OWNER’S MANUAL
STL-300 STOPLITE
®
TAcTIcAL LIghT & LASER
The STL-300 STOPLITE is a versatile and powerful
flashlight and strobe packing approximately 450
lumens* of blinding light. Handheld or easily
mounted to an accessory rail, the STOPLITE also
features an adjustable laser aiming module and a
remote momentary On/Off pressure switch. The grip
provides extra stability when mounted on a rifle.
FEATURES
n
450 Lumen* CREE LED
n
3 function modes – steady light, strobe light, laser (with light or independent)
n
Steady On/Off and momentary On/Off operation
n
Remote momentary On/Off pressure switch
n
Quick release rail attachment
n
Ergonomic rubber overmolded grip
cONTENTS
n
STL-300 STOPLITE Tactical Light & Laser
n
Velcro Accessory Pouch
n
Owner’s Manual
n
(4) AA Lithium Batteries
Interface
M1913 and compatible
Retention type
Quick release mode/fixed mount mode
Dimensions
6”H x 4.3”L x 2.5”W
Weight empty
12 oz
Weight w/batteries
14 oz
Light type
Hi Output LED
Power
450 Lumens peak*
Light switching
Steady on/off; momentary on/off
Light modes
Constant; Strobe
Strobe frequency
18-20 cycles per second
Visible Laser
Hi Visibility (635nm), Class IIIa, Red
Laser switching
Independent on/off
Laser modes
Stand-alone; with white light (constant & strobe)
Battery
Four AA Lithium batteries
Power management
Digital integrated circuit
Run time
4 hours peak (continuous operation)
SPEcIFIcATIONS:
*Lumens based on LED manufacturers specifications
Laser Information
Laser Type: Class IIIa visible laser diode
Peak Power: < 5mW
Wavelength: 635nm
Beam Color: Red
This product conforms with 21 CFR 1040.10.
WARNING: Do not point the laser beam at eyes. Permanent eye dam-
age can result. See attached warning label -
<5mW
Tactical gear Redefined
TM
WARNINgS
Before handling any firearm with the PRODUCT attached, read and understand the entire contents of
your firearms manual (especially the safety precautions and procedures for safe firearms handling)
and the PRODUCT manual. Failure to follow safety precautions when handling a firearm with the
PRODUCT attached can result in damage to property, serious injury, or death. Once the PRODUCT is
attached to the firearm, the firearm will be pointed at anything the PRODUCT is directed at. Do not
point the PRODUCT at anything or anyone that you do not intend to shoot.
The ON / OFF switch on the PRODUCT allows operation of the laser without placing your finger inside
the firearm trigger guard. Always keep your fingers off the trigger and outside the trigger guard until
you are ready to fire the weapon. Always verify the weapon is free of ammunition and the chamber
clear per the weapon’s operators manual before attempting to mount or dismount the PRODUCT
on the weapon. Always dismount the PRODUCT from the weapon when performing maintenance,
cleaning the PRODUCT, and when replacing batteries. Never place your hand in front of the weapon
muzzle when adjusting the PRODUCT.
Do not operate the PRODUCT around cleaning solvents or flammable/combustible materials,
in environments involving gasses or a flammable atmosphere, or in areas where gasoline, paints,
solvents, or other flammable liquids are stored.
When the laser dims or fails to illuminate, change batteries. Follow battery manufacturers’
instructions for the proper handling, storage, and disposal of batteries. Do not store the PRODUCT with
batteries installed.
BATTERY hAZARD WARNINg
Battery manufacturers warn against mixing new and used batteries or different brand batteries
together as this may increase the risk of leakage, fire or explosion. Do not, puncture, short-circuit,
disassemble or heat batteries above 212°F (100°C). Do not recharge the batteries unless they are
specifically designed as rechargeable batteries and then only in accordance with manufacturer’s
directions.
Lithium Batteries: Industry wide there have been reported incidents of off-brand Lithium
batteries exploding or catching fire creating serious consequences. SIGTac includes batteries from
Duracell® and other well-known battery manufacturers with its products, and strongly urges you to
only purchase replacement batteries from Duracell®, or other well-known battery manufacturers like
Panasonic® and Rayovac®. These batteries are designed for use in high performance, high-drain
devices, and their designs incorporate fault and heat protection for added safety. Use of inferior
batteries may cause an explosion or fire, creating risk of damage to your device that will void the
SIGTac warranty, cause damage to other property, and potentially serious injury or death.