SIG SAUER STL-100 Flashlight - Manual

STL-100 TacTicaL fLaShLighT
iNSTRUcTiONS
• 5 Watt high intensity LED with 120 lumens peak light*
• 2-position mode switch (Steady Light or strobe)
• Single/Double detent push button operation (momentary on or constant on)
• Waterproof, all aluminum machined housing
• Includes carry pouch & batteries
*Lumens based on LED manufacturers specifications
Body
Lens
Bezel Ring – 2-position mode switch
End Cap
Momentary/Constant on/
off button
Operating instructions
The flashlight is operated by two CR123A lithium batteries
1. Installing the batteries: Unscrew the End Cap; insert the batteries (+) end towards the Bezel Ring;
screw on the End Cap clockwise until snug.
2. Rotate the Bezel Ring to choose from two light mode selections: Steady Light
Strobe
3. For momentary operation, depress button to 1st detent and hold. Releasing the button turns off the light.
4. For constant operation, fully depress button to 2nd detent and release. To turn off, repeat.
general Maintenance
1. For continuous smooth operation keep the threads clean and lubricate with silicon lubricant.
Flashlight operation questions? Contact Customer Service at (603) 772-2302.
OWNER’S MaNUaL
fEaTURES