SIG SAUER E2 Grip Removal - Manual

Modular One Piece Grip –
Removal and Installation
Page: 1/2
SIG SAUER Inc. 18 Industrial Drive, Exeter, NH 03833 - (603) 772-2302 – www.sigsauer.com
Modular One Piece Grip – Removal & Installation
Grip removal: Before performing these steps, field strip the
pistol by following the instructions in Section 8.1 of the
Owners Manual
Action Picture
1. Insert the disassembly
tool in the magazine
well.
2. Rotate the disassembly
tool a quarter turn.
3. At the same time
remove the grip plate
from the rear of the
frame.