TeeJet RX 400p - Manual (Page 110)

RX 400p
98-05044 4-68
R1
Hgt Unit@meters Accessing this menu using the button allows you to
adjust the height units used to display the antenna
altitude. Two formats are available: meters and feet.
Vel Unit@km/h Accessing this menu using the button allows you to
adjust the velocity units used to display the speed of
the antenna. Three formats are available: km/h, mph,
and knots.
Back@ When accessed using the button, this menu item
returns the menu system to the previous menu.
Top?Menu@ When accessed using the button, this menu item
returns the menu system to the main menu.
4.15.3 Baud Rates Menu
This menu allows you to change the data rates of the external MAIN and AUX serial
ports of the RX 400p receiver. These ports are referred to as the NMEA I/O and
RTCM In ports, respectively, within the menu system for clarification of their
purpose. This menu system is detailed in Figure 4-15.
NMEA I/O@ 9600? A
RTCM In @ 9600?^
Back@
Top?Menu@
Pressing the and keys allows you to scroll through the available options.
Pressing the button with any item in focus will take the menu system to that
submenu. Pressing the button with the Back@ or Top Menu@ item in focus will
take the menu system to the previous menu or the Main menu, respectively.