TeeJet RX 400p - Manual (Page 57)

RX 400p
4-15 98-05044
R1
GPS@ When this menu is accessed using the button,
the menu system displays the contents of the GPS
menu, providing access to position and satellite
information, and access to GPS setup parameters.
WAAS@ When this menu is accessed using the button,
the RX 400p menu displays the contents of the
DGPS menu.
Depending on the differential mode of operation,
this menu will be named WAAS, OmniSTAR,
Beacon, Extern RTCM, or Autonomous. Inside
this menu will be status-related information and
configuration parameters. The structure of this
menu differs from one DGPS mode to another.
Config Wizard@ When this menu item is accessed using the
button, the Configuration Wizard will begin. This
feature allows you to easily configure the RX
400p step-by-step. This feature is described in
detail in Chapter 5.
System Setup@
When this menu is accessed, the menu system will
display the contents of the System Setup menu.
Inside this menu, you’ll have the ability to change
baud rates, view the current applications in
memory, customize the display parameters, and
monitor the versions of firmware installed in the
RX 400p receiver.
4.9 GPS Menu