Sears 247.797851 - Manual (Page 15)

• Test the engine by using the chipper-shredder. If
engine tends to stall or die out, it usually indicates
that the mixture is slightly lean and it may be
necessary to open ( ^ ) the needle valve slightly
to provide a richer mixture. This richer mixture may
cause a slight unevenness in idling.
Throttle
ENGINE SPEED
Your engine speed has been factory set. Do not attempt
to increase engine speed or it may result in personal
injury. If you believe the engine is running too fast or
too slow, take your chipper-shredder to the nearest
SEARS Service Center for repair and adjustment.
SERVICE RECOMMENDATIONS
SERVICE RECORD SCHEDULE SERVICE DATES
Fill in dates as you
complete regular service
First Before Every Every Begin- Before
5 Each 25 50 ning Each Storage
Hours Use Hours Hours Season
Check Fuel
Drain Fuel
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Service Air Cleaner
Clean Engine Cylinder Fins >/•
Replace or Clean Spark Plug u'
Spark Arrester Muffler
The Service Recommendations Chart is supplied to
assist the operator in proper maintenance of the
chipper-shredder. This is only a check list; instructions
will be found in the Maintenance and Service Adjust­
ment sections of this manual.
15