Range control, Display, Tones – Sears KENMORE 36745 User Manual

Page 10: F-code, R.'i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RANGE CONTROL

CANCELS BAKE,

BROIL OR

CLEAN OPERATION

PROGRAM

STATUS

DISPLAY

CLOCK/

TIMER TEMPERATURE

FUNCTION

DISPLAY DISPLAY

DISPLAY

UP ARROW PAD

(INCREASES TIME

OR TEMPERATURE)

PRESS TO TURN

TIMER ON AND OFF

SET AUTOMATIC

OVEN OPERATIONS

DOWN ARROW PAD

(DECREASES TIME

OR TEMPERATURE)

Your range Is controlled with a touch. You now have the
ease of setting the following operations:

CLOCK

BAKE

BROIL

DELAY CLEAN

TIMER

DELAY BAKE

CLEAN

The UP or DOWN arrow is used to set an amount of time
or change the temperature you want to use. By pressing
and holding down either pad the numbering will change
quickly. By pressing and releasing either pad the

numbering will change slowly.

DISPLAY:

Once you have programmed your control for any
operation, you can display the setting by pressing the
appropriate pad. For example, If you are using the
TIMER and want to see the time of day, press CLOCK.
The display will show the time of day.

l 3 - n n 8 B 8

/ 1

« 1

/ I /

bake

broil

r

f

CLEAN LOCK L

TONES:

The end-of'cycle tone will sound at the end of timer use

and automatic oven functions. The end-of-cycletone is

3 short beeps followed by i beep every 6 seconds that

repeat until you press any operation. To cancel the end-
of-cycle tone, press any key except the UP or DOWN
arrow key. if you would like to eliminate the repeating
beeps, push and hold CLEAR/OFF for ten seconds. To
return the 1 beep every 6 seconds, push and hold
CLEAR/OFF for 10 seconds.

F-CODE:

11 the time display beeps continuously and flashes an
“F” followed by a number, you have a function error
code. Note the number after the "F”. Press CLEAR/
OFF. Allow oven to cool for 1 hour. If problem repeats,
disconnect all power to the range and call for service.

Advise your service technician of the number following

the “F” in the display.

PRESS

r ' U

r.'i

TIMLR

I I

CLOCK

I I

COOK

I I CLEAfjl j

broil

l|

BAKE

NOTE: You cannot set BAKE, BROIL or COOK

TIME while the oven door is in the locked

position. If you try, the word “DOOR” will
appear in the display. The oven door
lock is to be used for Self-Cleaning only.

NCERC18-2

Advertising
This manual is related to the following products: