Troy-Bilt PONY 664DM User Manual
Operator’s manua, Rear-tine tiller model
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Operator’s Manua
Rear-tine Tiller Model
664D—Pony®
E666M—Pony®
IMPORTANT:READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester
for the muffler is available by contacting the service department at Troy-Bilt LLC, P.O. Box 361131 Cleveland, Ohio 44136-0019.
TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019
PRINTED IN USA
FROM NO. 770-10597A
(11/2002)
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Operator’s Manua
- 2 Assembly
- 41 Operation
- 5 Maintenance
- A WARNING
- L
- Before inspecting, cieaning or servicing the machine, shut off engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to toiiow these instructions can resuit in serious personai injury or property damage.
- CHECK FOR OIL LEAKS
- TRANSMISSION GEAR OIL SERVICE
- A. To Check Transmission Gear Oil Level:
- B. To Drain and Refill the Transmission:
- Before inspecting, cieaning or servicing the machine, shut oft engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to foiiow these instructions can resuit in serious personai injury or property damage.
- ENGINE OIL SERVICE
- AIR CLEANER SERVICE
- SPARK PLUG SERVICE
- SPARK ARRESTER SCREEN SERVICE
- ENGINE CLEANING
- CARBURETOR/GOVERNOR CONTROL AOJUSTMENTS
- A WARNING
- L
- Before inspecting, cieaning or servicing the machine, shut off engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to toiiow these instructions can resuit in serious personai injury or property damage.
- WHEEL GEAR CABLE ADJUSTMENT OFF SEASON STORAGE
- BOLD TINES
- A. Tine Inspection:
- B. Removing a Single Tine:
- C. Removing a Tine Assembly:
- Before inspecting, cieaning or servicing the machine, shut oft engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to foiiow these instructions can resuit in serious personai injury or property damage.
- A WARNING
- L
- Before inspecting, cieaning or servicing the machine, shut off engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to toiiow these instructions can resuit in serious personai injury or property damage.
- A CAUTION
- Checking and Adjusting Reverse Ciutch Beit Tension
- FORWARD CLUTCH BELT REMOVAL AND REPLACEMENT
- Before inspecting, cieaning or servicing the machine, shut oft engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to foiiow these instructions can resuit in serious personai injury or property damage.
- L
- Before inspecting, cieaning or servicing the machine, shut off engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to toiiow these instructions can resuit in serious personai injury or property damage.
- REVERSE CLUTCH BELT REMOVAL AND REPLACEMENT
- Before inspecting, cieaning or servicing the machine, shut oft engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to foiiow these instructions can resuit in serious personai injury or property damage.
- BATTERY MAINTENANCE
- A DANGER
- L
- Before inspecting, cieaning or servicing the machine, shut off engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to toiiow these instructions can resuit in serious personai injury or property damage.
- Before inspecting, cieaning or servicing the machine, shut oft engine, wait for aii moving parts to come to a compiete stop, disconnect spark piug wire and move wire away from spark piug. Remove the key from the keyswitch on units so equipped.
- Faiiure to foiiow these instructions can resuit in serious personai injury or property damage.
- HANDLEBAR ASSEMBLY and CONTROL LEVERS
- ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER
- TRANSMISSION HOUSING, COVERS, SEALS, GASKETS, PLUGS
- WHEEL SHAFT, ECCENTRIC SHAFT and TILLER SHAFT ASSEMBLIES
- BOLO TINES, WHEELS
- ROW MARKER AHACHMENT & BUMPER AHACHMENT
- HOOD, BRACKET and DEPTH REGULATOR
- HILLER/FURROWER AHACHMENT
- ELECTRIC START ASSEMBLY
- TROY-BILT TILLER LIFETIME LIMITED WARRANTY