Operating symbols, L + l – Troy-Bilt PONY 664DM User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4.

To reduce the chances of a fire

hazard, keep the engine free of grass,

ieaves, or excessive grease.

5.

Store gasoiine in a cooi, weii-venti-

iated area, safeiy away from any spark-
orfiame-producing equipment. Store

gasoline in an approved container,
safely away from the reach of children.

6

.

Refer to the Maintenance section of

this Manual and in the separate Engine

Owner’s Manual for instructions if the

tiller is to be stored for an extended

period.

7.

Never perform maintenance while

the engine is running or the spark plug

wire is connected, except when specifi­

cally instructed to do so.

8

.

If the fuel tank has to be drained, do

this outdoors.

Operating Symbols

Various symbols (shown here, with

word descriptions) may be used on the

tiller and engine.

FAST

SLOW

STOP

START

l + l

^

CHOKE

ROTATING

OFF

TINES

^TOy

STOP

hi

CHOKE

ON

R

REVERSE

LEVER DIRECTION

TILLER DIRECTION

-[2i

ENGAGED DISENGAGED

DECALS

For your safety and the safety of others,

various safety message decals are on your

unit (see Figure below). Keep the decals

clean and legible at all times. Contact your

local service dealer or the factory for

Control Descriptions,

Tine Warning (on right

side of hood flap)

Starting Stabilization (on
top of engine or fuel tank)

replacements if any decals are damaged or
missing.

Refer to the Parts List pages for decal

locations and part numbers.

Operating Instructions and

Warning Messages

Surfaces/Moving Belts

(on top of belt cover)

Figure 1: Location of Safety and Operating Decais

A WARNING

TO AVOID SERIOUS INJURY:

• READ THE OWNER’S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG­

GING TINES OR MAKING REPAIRS.

• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.

Advertising
This manual is related to the following products: