ADLINK IMB-S90 - Manual (Page 106)

IMB-S90 IPMI User’s Manual
106
Save: To save any changes made.
Note: This configuration is used by Restore Factory Defaults process.
Reset: To reset the modified changes.
3.10.1.1 Files Preserved
3.10.1.1.1 SDR
Following files will be preserved.
SDR.dat: This file contains the sensor data record information that is used in IPMI.
Dependency Configurations: NIL
3.10.1.1.2 FRU
Following files will be preserved.
FRU.bin: This file contains the logical field replaceable unit data that are used by IPMI
Dependency Configurations: SDR
3.10.1.1.3 SEL
Following files will be preserved when Delete SEL reclaim space is disabled.
SEL.dat: This file contains the system event logs that are being logged by the IPMI.
Following files will be preserved when Delete SEL reclaim space is enabled.
Selreclaiminfo.ini – The file contains the SEL repository information.
SEL folder – This folder contains the multiple files of event logs.
Dependency Configurations – IPMI
3.10.1.1.4 IPMI
The following files are preserved in IPMI configuration.
IPMI.conf:This file contains the IPMI configurations such as SEL rep size, SDR rep size,
interface specific, enable/disable, Primary/Secondary, IPMB Bus number etc.
dcmi.conf: This file contains the DCMI1.5 specification parameters such as DHCP
Timing1, DHCP Timing2, DHCP Timing3. The files are preserved only when DCMI1.5
feature is enabled in the MDS project configuration.
pwdEncKey: This file contains the keys that are used to decrypt the passwords. When the
user password option is enabled in the MDS project configuration, this file will be
preserved.
Dependency Configurations - NIL