ADLINK IMB-S90 - Manual (Page 75)

IMB-S90 IPMI User’s Manual
75
• The
Common Name for which the certificate is to be generated.
• The
Name of the Organization for which the certificate is to be generated.
• The
Overall Organization Section Unit name for which certificate to be
generated.
• The
City or Locality of the organization
• The
State or Province of the organization
• The
Country of the organization
• The
email address of the organization.
• The number of days the certificate will be valid in the Valid For field.
4. Choose the Key Length bit value of the certificate
5. Click Generate to generate the certificate.
6. Click View SSL tab to view the uploaded SSL certificate in user readable format.
Note:
•
Once you Upload/Generate the certificates, only HTTPs service will get
restarted.
•
You can now access your Generic MegaRAC® SP securely using the
following format in your IP Address field from your Internet browser:
https://<your MegaRAC® SP’s IP address here>
•
For example, if your MegaRAC® SP’s IP address is 192.168.0.30, enter the
following: https://192.168.0.30
•
Please note the <s> after <http>.You must accept the certificate before you
are able to access your Generic MegaRAC® SP.
3.7.20 System and Audit Log
In MegaRAC GUI, System and Audit log page displays a list of system logs and audit logs
occurred in this device.
To open System and Audit log page, click Configuration > System and Audit Log from
the menu bar. A sample screenshot of System and Audit Log Settings Page is shown
below.