Digiframe DF-SC5701 - Manual (Page 11)

- 7 -
4. Connecting to a Computer
(card reader mode)
By connecting the scanner to a computer, you can use the
scanner as a memory card reader, so that you can freely view or
copy files from the memory card using the computer.
4.1 How to connect to a computer
„ Connect the plug on the AC adapter cable to the power input
on the scanner.
„ Plug the AC adapter into a power outlet. Press POWER button
for 2 seconds to power it on, the indicator light on the scanner
will blink in green and then in red.
„ Insert a memory card into the memory card slot, or a USB
flash drive into the flash drive slot, then the indicator light on
the scanner stops blinking and stays on steady, indicating the
scanner is ready. (Green LED = 300dpi, Orange LED = 600
dpi)
„ Connect the mini end of the USB cable (included with scanner)
to the Mini USB connector on the scanner.
„ Power on your PC, and then connect the large end of the USB
cable to a USB port on your PC.
„ When the scanner connects successfully with a computer, a
Removable Disk (F) (F represents the removable drive letter)
will be shown in Windows Explorer. If a memory card or USB
flash drive is inserted to the scanner, the Removable Disk will
be replaced with the name of the memory card or flash disk.