Digiframe DF-SC5701 - Manual (Page 7)

- 3 -
3. Installation & Operation
Precautions
„ Keep the product out of direct sunlight. Direct exposure to the
sun or excessive heat may cause damage to the unit.
„ Do not install the product in a humid or dusty place.
„ Be sure to use the proper AC power source.
„ Place the product securely on an even, flat surface. Tilted or
uneven surfaces may cause mechanical or paper-feeding
problems.
„ Retain the product box and packing materials for shipping
purposes.
3.1 Initial setup
„ Plug the small end of the AC adapter cable to the power jack
on the scanner.
„ Plug the AC adapter into a power outlet. Press and hold the
POWER button for 1-2 seconds. The indicator light on the
scanner will blink in green and then in red.
„ Insert a memory card (SD/SDHC/MMC card) into the memory
card slot, or insert a USB flash drive into the flash drive slot,
the indicator light on the scanner stops blinking and stays on
steadily, indicating the scanner is ready.