Echelon LonMaker - Manual (Page 136)

120 Designing Networks
Connection Description New SCD
Messaging
Service
Multicast
Addressing
Mode
Acknowledged Acknowledged Group
Acknowledged with Alias Multicast ● Acknowledged Alias
ConnectDescTemplate_0* N/A N/A
Repeated with Alias Multicast ● Repeated Alias
Repeated with Broadcast Multicast ● Repeated Broadcast
Repeated with Group Multicast
Repeated**
Repeated Group
SCD_Alias ● ● Acknowledged Alias
SCD_Default
● ●
Repeated Group (if
available);
otherwise, domain
broadcast
SCD_SubnetBcast ● ● Repeated Subnet broadcast
SCD_Unicast ● ● Acknowledged Group
Unacknowledged with Alias Multicast ● Unacknowledged Alias
Unacknowledged with Broadcast Multicast ● Unacknowledged Broadcast
Unacknowledged with Group Multicast
Unacknowledged**
Unacknowledged Group
* ConnectDescTemplate_0 is the default connection description. It enables the LonMaker tool to automatically select a smart
connection description that uses the most appropriate message service type and addressing mode for the connection. It cannot be
modified or deleted.
** Repeated and Repeated with Group Multicast are identical, as are Unacknowledged and Unacknowledged with Group
Multicast. Repeated and Unacknowledged support connections using these connection descriptions in LonMaker networks that
were created with previous releases of the LonMaker tool.
You can view the properties of these pre-defined connections and create new connection descriptions
in the Connection Details dialog box. You can also use this dialog to change the properties of a pre-
defined connection. To access this dialog box, right-click a connector shape, select Properties from
the shortcut menu, and click Properties on the Network Variable Connection dialog box.
Optionally, you can open the LonMaker menu, click LonMaker Options, select Smart Connection
Descriptions from the options category list, and then click Details.