Generalmusic wk1or - Manual (Page 74)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User Styles 67
1
2
3
4
5
7
1
3
Clear Track, Clear Riff, Clear Tempo, Clear All
Clear Track function is used to clear a single track of the Riff, all the tracks
of a Riff, the Tempo track in a Style or the entire Style. Clear Track and Clear
Riff functions modify the current Variation. Clear Tempo and Clear All modify
the entire Style.
1 . When the Style is in Record mode, press the CLEAR key.
2 . Select the Riff you wish to cancel using the + and – in the numeric
keypad.
You can choose among the following Riffs::
BasicMaj, BasicMin, Basic7th, IntMajor, IntMinor, In7_th, EndMajor,
EndMinor, End7_th, Fill, TempoTrk, ALL.
3 . Select the Variation by pressing the relative key.
4 . Select the track you wish to cancel by pressing the corresponding
Function (F1- F5) key.
5 . Select the Clear TempoTrk function using the TEMPO/DATA keys if you
with to cancel the recorded Tempo and bring it back to its original default
status.
6 . Select the Clear All function using the TEMPO/DATA to completely cancel
the Style.
7 . After selecting the desired section desiderata (Track, Riff, Tempo, All),
press ENTER twice to confirm.
Press ESCAPE to exit and return to Record mode.
A recorded track is identified by the name appearing above the Program
Change number.
Saving your User Style to a Floppy Disk
User Styles are stored to the machine memory even when WK1 is turned
off. To prevent unwanted loss of data, you are recommended to save your
User Styles to a Floppy Disk. Information about Save Style procedure are
given the “DISK” chapter of the Owner’s Manual.
Note: Pressing ENTER twice will cancel the Riff completely.
Style Copy
COPY Function is used to copy an existing Style (either ROM or User) to one of
the 8 Style User locations (96-103) available in the memory. For example, you
can use the COPY function to copy a ROM Style and successively modify the
copy by adding or cancelling elements from the Style tracks.
1 . When in Record mode, press the COPY function key.
The number blinking to the left corresponds to the source Style. The number
to the right is the destination, automatically selected. For example, the User
Style in location 96 will have location 97 as destination.
2 . Use the TEMPO/DATA keys to select the Style you wish to copy (00- 103).
3 . Press ENTER twice to confirm copy.
Press ESCAPE to exit the function and return to Record mode.
LOWER
MEMORY
ARRANGE
ON/OFF FILL A FILLB /TAP 4
2
LOWER
MEMORY
ARRANGE
ON/OFF FILL A FILLB /TAP 4
LOWER
MEMORY
ARRANGE
ON/OFF FILL A FILLB /TAP 4