Generalmusic wk1or - Manual (Page 81)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
74 Owner’s Manual
Modifications to CHANNEL and LOCAL can be saved to the Performance.
Channel: use this individual track function to assign to each track the desired
MIDI channel. To enable this function, press ENTER.
The 3-digit display indicates the number of the MIDI channel assigned
to the track (e.g.: C01= channel 1), while the 8-digit display indicates
the track number. Use the + and – keys to select the track.
The TEMPO/DATA keys control the MIDI channel number to assign to
the track (1-16) as well as the track OFF status. To select each track
quickly, use the relative Function (F1 … F8) key.
After selecting all the 16 tracks with the PAGE + key, the display
shows Common and Chord tracks and the respective MIDI channel
numbers. Select the MIDI channel you wish to assign to COMMON
and to CHORD channels (if you are using a MIDI accordion, refer to
the “MIDi” chapter of the Owner’s Manual).
Press ESCAPE to exit the CHANNEL mode and return to the MIDI
selection page. Continue your selection using the TEMPO/DATA key.
MIDI Local: Use LOCAL (ON/OFF) Function to decide whether WK1Or
keyboard should control the sound generation of each section.It is
possible to separate each track from the sound generation. Press
ENTER to enable this individual track function.
The number of the track appears in the display. Usa F9
Function key to toggle between Group A tracks (01-08) to
Group B tracks (09-16). Use the TEMPO/DATA keys to
establish the ON/OFF status of the track, and the CURSOR key
to select the track.
Press ESCAPE to exit LOCAL mode and return to the MIDI
selection MIDI page. Continue your selection using the TEM-
PO/DATA key.
Internal: when WK1 Or is active, it is controlled by the internal CLOCK;
this device sets and maintains the established Tempo.
If you wish to exclude the internal CLOCK, the Tempo followed
by WK1 Or will be set by the computer or external sequencer
(CLOCK EXT), connected to WK1Or MIDI IN port; in this case,
use the TEMPO/DATA keys to select “External” mode.
G.Midi: if WK1Or is set to General MIDI ON, the instrument becomes
compatible with all MIDI Files that are loaded to the memory.
If you wish to communicate via MIDI with instruments that are not
General MIDI compatible, it is advisable to set WK1Or to General
MIDI OFF position. To enable Generalmusic standard (GMX) it is
necessary to set General MIDI to OFF. In this way all the Sound
banks and all the 44 effects provided by WK1Or will be at your
disposal when programming your music backings.
Start/Stop: If the START/STOP function is active, WK1Or will start as
soon as the START command will be sent by the external device
(computer, sequencer) connected via MIDI. Use the TEMPO/DATA
key to toggle between ON and OFF.
MIDI Traspose In: ON/OFF
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Note: To select the other 8 tracks (from 9 to 16),
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
use the F9 Function key.