Casella CEL Microtherm WBGT heat stress monitor User Manual
Page 3
Warnings
WARNINGS !
Any attempt to charge non-rechargeable cells is
hazardous and can result in damage.
This instrument incorporates an internal fast-charger
circuit suitable for recharging nickel-cadmium cells. The
charger is enabled/disabled via a switch in the battery
compartment. (See Figure 9 in Section 2.1.1.)
This instrument is delivered with re-chargeable nickel-
cadmium cells and with the CHARGER circuit ENABLED.
DISABLE the charger circuit before fitting and using
non-rechargeable cells.
DISPOSAL OF NiCd BATTERIES
Rechargeable batteries contain CADMIUM
and must be disposed of in a safe manner. In
some countries, this may involve specialist
licensed waste disposal companies.
Used batteries MUST NEVER be disposed of
by placing in a fire or incinerator, nor must
they be punctured, crushed or otherwise
mutilated or opened up in anyway.
MICROTHERM instruments contain no user serviceable
components. If an electrical fault is suspected the
instrument must be returned to Casella CEL Ltd for repair.
The instrument and sensors contain delicate components.
They should not be dropped or subjected to mechanical
shock. Failure to comply will render the warranty invalid.
Cd
MICROTHERM Heat Stress WBGT &
WinHSM Application Software - User Manual
Page 3 of 44