SMK-Link Electronics GoSpeak! Pro - Manual (Page 12)

Page
10
.
Connecting Your Lapel Wireless Microphone
Your GoSpeak! wireless lapel microphone is already
paired electronically with your GoSpeak! Pro speaker.
To enable the microphone, follow the six steps below:
1. Install the AA batteries (included) in your lapel microphone transmitter
box.
2. Turn your GoSpeak! Pro speaker Master Volume control all the way
counterclockwise (sound off).
3. Plug your lapel microphone into your transmitter box and turn the box
on.
4. Turn on your GoSpeak! Pro Speaker.
5.*Match the A or B microphone channel to the GoSpeak! Pro channel.
6. Slowly increase the Master Volume on your GoSpeak! Pro until the
correct microphone volume is established.
*GoSpeak! Pro can only connect to one wireless mic at a time.