SMK-Link Electronics GoSpeak! Pro - Manual (Page 9)

Page
7
Connecting Multiple GoSpeak! Pro’s
To co connect multiple GoSpeak! Pro speakers, simply plug in a 1/8”
(3.5mm) audio cable into the LINE OUT jack on the first GoSpeak!
and the other end into the LINE IN jack on the second GoSpeak! Pro
as shown below:
Input and Speaker Volume Controls
Your GoSpeak! Pro speaker comes with several controls to facilitate
adjusting signal input from your microphone or from other music
sources. Additionally, the speaker has a MASTER Volume control, a
speaker MUTE switch and an ALC (Auto Limiter Control) switch.
The Auto Limiter Control (ALC)
function helps eliminate distortion
caused by microphone
over-modulation.
Master GoSpeak!
LINE OUT
Slave GoSpeak!
LINE IN