Adept EX SmartContoller User Manual
Page 51
Advertising
Chapter 3: Operation
ference is that a custom resistor network and two differential receivers are used on each of the
A and B inputs. See the figure Belt Encoder Typical Input Circuit on page 53 for a schematic.
Adept strongly recommends using differential encoder outputs for maximum noise immunity.
See the
Adept ACE User's Guide
for more information on setting up and programming a con-
veyor-tracking application.
NOTE: Conveyor tracking requires the eV+ Extensions License, which can be obtained from
Adept.
Adept SmartController EX User’s Guide, Rev. B
Page 51 of 96
Advertising