ATEIS IDA8C - Manual (Page 54)

Ateis Studio 54
© 2012 ATEÏS
Evacuation Inputs(Voltage Mode)
On Voltage:
Item Minimum Maximum Unit
Voltage 18 72 VDC
Contact Outputs + EVAC, Fault State Outputs
Item Minimum Maximum Unit
Voltage - 100 VDC
Current - 0.5 ADC
Working Temperature.
0°C ~ 40°C
4.1.3.5 3rd Party Control
The following table list 3rd Party Control protocols IDA8C Supported.
Protocol
Interface
Function
Connection Settings
Ateis 3rd
Party
Protocol
Ethernet(UDP)
UDP Port =
19761
Read/Write value of parameters.
Stepped adjustment for parameters.
Modbus PDC(RS485) PDC Port 1~ 2
Level control
Paging
Read Monitoring Status
Read Evacuation Status
Play Message
Logic I/O Control
4.1.3.6 Peripherals
Following table is the peripherals supported by IDA8SL:
Device Connection Max. Num Function
Fireman MICFireman MIC
Input
1 Paging where operator is close to IDA8C.
PPM AS PDC 31/PDC Remote console for with paging ability.
PSS AS PDC 1/PDC
Remote console for Paging, Event Triggering(Element Control,
Master/Sub Preset Control).
URC AS PDC 1/PDC
Remote console for Master/Sub Preset Controlling, Element
Controlling.
URGP PDC 1/PDC Evacuation Input extension.
DNM PDC 1/PDC Auto noise gain for audio signals.
PPM-IT5 Ethernet
1 Active
Over Eth
Paging, Element Control, Master/Sub Preset Control.
URC200
TPC
Ethernet Eth. Limit Parameters Control, Master/Sub Preset Control.
CD8 PDC 31/PDC
Wall mounted cabinet remote paging console with 8 buttons/
zones.
CD16 PDC 31/PDC Wall mounted cabinet remote paging console with 16 buttons/