Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 15)

4.
Place rolled supply on the supply holder, located against the inside of the printer.
Rolled label supply unrolls from the top or the bottom; rolled tag supply unrolls from
the bottom only (tag rolls are wound face in).
Note:
Do not pick the printer up by the supply holder.
S u p p l y
H o l d er
S u p p l y H o l d e r G u i de
Place a fan-fold supply stack behind the printer, label side facing up. Lay the label
strip over the supply holder.
5. Adjust the supply holder guide so that it barely touches the supply, making sure the
supply moves freely.
Loading Supplies 2-3