Chapter 2. setting up your printer, Choosing a suitable location, Printer dimensions – Compuprint 4247-L03 User Manual
Page 17
Chapter 2. Setting Up Your Printer
This section contains instructions for setting up your printer.
Choosing a Suitable Location
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
Consider the following points when you choose the location for your printer:
v
The distance between the printer and the host computer must not exceed the
length of the interface cable;
v
The location must be sturdy, horizontal and stable;
v
Your printer must not be exposed to direct sunlight, extreme heat, cold, dust or
humidity (see Appendix B, “Printer Specifications,” on page 121);
v
The power outlet must be compatible with the plug of the printer's power cord.
v
For best continuous forms stacking, the forms should be stacked on the floor or
on a surface below the base of the printer.
v
For successful forms parking, the input forms stack must always be lower than
the base of the printer.
There must be sufficient clearances on all sides for easy operation. The required
space is shown in Figure 2:
80 cm
31.5 in.
20 c
m
7.9
in
10
0
cm
39
.4
in
20 c
m
7.9
in
1
00
cm
39
.4
in
Hc0i0005
Figure 2. Printer Dimensions
5